SMOKE-WE Two-Way Wireless Smoke Sensor (SMOKE-WE)
Features
A smoke sensor is an integral part of everyone’s, home protecting you against the threat of fire. With the SMOKE-WE you can sleep safely knowing that your home is protected.
Fully supervised for low battery
When the battery is running low the SMOKE-WE will begin to chirp once in 32 seconds. It also sends a signal to your control panel reporting the status. If you are using the HomeControl+ Security System you will receive a warning on your app and you can even set up notifications to come through on your smartphone or tablet.
Manual testing
There is a manual test button which will verify battery status and alarm operation making sure that the device is working properly.
Loud 85dB sounder and LED signaling
Built-in 85dB local sounder and flashing red LED light will indicate prescence of smoke
Tamper Protection
If the front of the device has not been put back on after a battery change the rear tamper protection will trigger warning you that the device is not fitted correctly.
The wireless technology used on the Enforcer system holds a significant advantage over one way and some two way wireless products currently available on the market.
One-Push-To-Learn-Button
The Enforcer Two-Way Wireless proticol allows easy learning of all its peripherals, with the push of a button you can add any of the detectors or sensor to the Enforcer 32-WE or HomeControl+ Panel.
868MHz Transceiver FM technology
Signal Strength Indicator on the Device
One of the key advantages of implementing of the SSI technology is to allow the installer to view the wireless transmission signal strength on both the control panel and wireless devices in real time.
Pyronix High Security Wireless Protocol Encryption
The Two-Way wireless protocol has been developed by Pyronix to ensure that the communication between all wireless system components is protected on a very high security level. The protocol uses the 128 bit Pyronix advanced encryption.
Technical Specifications
Security and safety sensors technical characteristics
Smoke detectorYes
Tamper protectionFront and rear
Button sensor testYes
LED sensor testRSSI, battery status
Sound level85 dB/3m
Enforcer two-way wireless technology
Signal Strength Indicators (SSI)Yes
Instant two way device control (ITDC)Yes
Pyronix high security two way wireless data encryption protocol (TDE)Yes
Pyronix intelligent jamming detectionYes
Programmable wireless supervision timeYes
868MHz transceiver FM technologyYes
One push to learnYes
Tranmission methodFully encrypted rolling code
Transmission range1.6 km in open space
Mounting
Ceiling mountedYes
Environmental and operating features
Certified operating temperature0°C to +49°C
Nominal operating temperature-10°C to +50°C
Physical dimensions (H x W x D)120 x 120 x 5.3mm
Electrical & battery
Battery type1 x CR123A 3V lithium battery
Battery life1 year
Low battery warningChirp once in 32 seconds with yellow flashing LED
Certifications and warranty
Electrical conformityCE
EN CertificateEN14604
Environmental classII
Warranty2 years
